March TE-7.5K-MD 230/460 VAC Magnetic Drive Centrifugal Pump 0156-0112-0100

Series 7.5 Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when the pump is equipped with Air or DC motors. TE-7.5K-MD 1PH 2HP Phase Magnetic Drive Pump March Pump's industrial TE-7.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems. It is capable of generating a maximum flow of 82 gallons per minute at 40 feet, and its maximum head is 85 Feet (or around 37PSI). The standard wet end (the materials that come into contact with the solution) is composed of natural Kynar, Viton, Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a 3 Phase 230/460V 2 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 60PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7.5K-MD centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7.5K-MD is suitable for your application, please contact March Pump. Options O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene Imp. Bushing: Carbon, Ceramic, Mica-Teflon, or Ryton/Teflon/Carbon (2 necessary) Perfect for Applications Including Applications for the TE-7.5K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, microchip manufacturing, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners. Great for Chemicals Including The TE-7.5K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-7.5K-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-7.5K-MD for any of the above listed chemicals.  Chemical Resistance Chart