March TE-8K-MD 230/460 VAC Magnetic Drive Centrifugal Pump 0157-0008-0800

Series 8 Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors. TE-8C-MD 3PH 3HP Phase Magnetic Drive Pump March Pump's industrial TE-8K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 120 gallons per minute at 30 feet, and its maximum head is 95 Feet (or around 41PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connectionis 2 inch male pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a 3 Phase 230/460V 3 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-8K-MD centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-8K-MD is suitable for your application, please contact March Pump. Options O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene Front and Rear Thrust Washer: Ceramic or Hastelloy Shaft: Ceramic or Hastelloy Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon Motor Bracket: Cast Iron or Plastic Perfect for Applications Including Applications for the TE-8K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations. Great for Chemicals Including The TE-8K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide,Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-8K-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-8K-MD for any of the above listed chemicals. Chemical Resistance Chart