March TE-6T-MD 230/460 VAC Magnetic Drive Centrifugal Pump 0153-0002-0300

Series 6 Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors. TE-6T-MD 3 Phase Magnetic Drive Pump March Pump's industrial TE-6T-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Ryton, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1Phase 115/230V or 3 Phase 230/460V 0.5 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-6T-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-6T-MD is suitable for your application, please contact March Pump. Options O-Ring: Viton, Teflon Encapsulated Viton, or Ethylene Propylene Front Thrust Washer: Ceramic or Hastelloy Shaft: Ceramic, Hastelloy, or 316 Stainless Steel Imp. Bushing: Carbon, Mica Teflon, or Ryton/Teflon/Carbon The front housing, rear housing, and impeller are available in Polypropylene. Perfect for Applications Including Applications for the TE-6T-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, silver recovery systems, and marine air conditioners. Great for Chemicals Including The TE-6T-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, SodiumHydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-6T-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-6T-MD for any of the above listed chemicals.  Chemical Resistance Chart