March TE-7.5K-MD 230/460 VAC Magnetic Drive Centrifugal Pump 0156-0111-0100
March 0156-0111-0100 TE-7.5K-MD Series 7.5 magnetic drive centrifugal pump with a 2 HP, three-phase 230/460V TEFC motor. Features a natural Kynar wet end, Viton O-ring, ceramic shaft and thrust washers, and carbon impeller bushings for compatible industrial liquid transfer and circulation.
March 0156-0111-0100 TE-7.5K-MD Magnetic Drive Pump
The March 0156-0111-0100 is a TE-7.5K-MD Series 7.5 magnetic drive centrifugal pump designed for industrial liquid transfer and recirculation. This complete pump assembly combines a 2 HP, three-phase, 230/460V TEFC motor with a natural Kynar wet end.
Its magnetic coupling transfers power to the impeller without a conventional rotating shaft seal, reducing a potential leakage path. The wet end incorporates natural Kynar housings and impeller, a Viton O-ring, ceramic shaft and thrust washers, and carbon impeller bushings.
Key Features and Benefits
- Magnetic Drive Technology: Eliminates the conventional dynamic shaft seal through the pumping chamber.
- Natural Kynar Wet End: Provides the manufacturer-specified polymer housing and impeller construction.
- 2 HP TEFC Motor: Three-phase 230/460V drive for compatible industrial installations.
- Series 7.5 Performance: Maximum flow of 82 GPM and maximum head of 85 feet at 60 Hz, at separate points on the pump curve.
- Serviceable Construction: Individual wet end components and replacement kits are identified in March documentation.
Industrial Applications
The March TE-7.5K-MD may be used for compatible chemical transfer, process circulation, industrial liquid handling and OEM pumping systems. Verify chemical compatibility and the required operating duty before installation.
Installation and Maintenance
Provide adequate inlet liquid supply and follow the manufacturer priming and installation instructions. Avoid dry running, cavitation and operation outside published limits. Disconnect power, relieve pressure and safely drain the pump before inspecting the impeller, ceramic shaft, thrust washers or Viton O-ring.
Replacement and Ordering Guidance
Part number 0156-0111-0100 identifies the three-phase TE-7.5K-MD complete pump. March lists wet end kit 0156-0031-0100 for the corresponding configuration. Confirm the original model, motor voltage, phase and fluid compatibility before ordering.
| Brand | March |
|---|---|
| Product Type | Pump |
| Application | Beer Pump |
| Inlet/Outlet Connection Type | MPT |
| Inlet Size | 2 in |
| Motor Hz Rating | 50/60 |
| Motor Phase | 3 |
| Motor Voltage | 190/380 VAC at 50Hz, 230/460 VAC at 60Hz |
| Outlet Size | 1-1/2 in |
| Max Flow | 82 gpm (310.4 lpm) |
| Motor | Available in Explosion Proof |
| Max Head | 85 ft / 18 m |
| Material - Wet End | Natural Kynar |
| Max Head Range | > 70 ft |
