March TE-5K-MD-AM Magnetic Drive Centrifugal Pump 0150-0120-0400

Series 5 Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors. TE-5K-MD-AM Magnetic Drive Pump March Pump's industrial TE-5K-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 18 gallons per minute at 1 foot, and its maximum head is 50 Feet (or around 21PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 male pipe thread. The standard motor is a .125 Horsepower compressed air motor which requires 60PSI. The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-5K-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. All Series 5 March Pumps are compatible with reservoir and filler cap. To determine if the March TE-5K-MD-AM is suitable for your application, please contact March Pump. Options O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene Shaft: Ceramic or 316 Stainless Steel Imp. Bushing: Carbon or Mica Teflon The front housing, rear housing, and impeller are available in Natural Kynar. Perfect for Applications Including Applications for the TE-5K-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, small scrubbers, detergent mixers, and carbon arc furnace cooling.   Great for Chemicals Including The TE-5K-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide,Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5K-MD-AM may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-5K-MD-AM for any of the above listed chemicals.