March AC-3CP-MD 115 VAC Magnetic Drive Centrifugal Pump 0130-0018-0100

The March 0130-0018-0100 AC-3CP-MD Magnetic Drive Pump is a Series 3 sealless centrifugal pump designed for chemical circulation, fluid transfer and other compatible liquid-handling applications. This exact part number identifies the AC-3CP-MD complete standard pump with a 115V single-phase air-cooled motor.

The AC-3CP-MD uses magnetic-drive technology to transfer motor power to the impeller without a conventional rotating shaft seal. At 60 Hz, the March 0130-0018-0100 provides a maximum flow of 10 GPM and a maximum head of 20.5 feet. Its polypropylene, Buna-N and ceramic wetted components provide a practical configuration for a variety of compatible fluid-handling systems.

March 0130-0018-0100 Specifications

• Manufacturer: March Manufacturing / March Pump
• Part Number: 0130-0018-0100
• Model: AC-3CP-MD
• Series: Series 3
• Pump Type: Sealless centrifugal magnetic drive pump
• Voltage: 115V AC
• Phase: Single phase
• Frequency: 60 Hz
• Motor Power: 1/15 HP
• Maximum Flow: 10 GPM
• Maximum Head: 20.5 ft
• Inlet: 3/4-inch FPT
• Outlet: 1/2-inch MPT
• Maximum Internal Pressure: 50 PSI
• Maximum Liquid Temperature: 190°F (87°C)

Wetted Materials

• Front Cover: Polypropylene
• Rear Housing: Polypropylene
• Impeller: Polypropylene
• O-Ring: Buna-N
• Shaft: Ceramic
• Thrust Washer: Ceramic
• Impeller Magnet: Ceramic magnet

Key Features

• Sealless magnetic-drive design eliminates the need for a conventional rotating shaft seal
• 115V single-phase AC-3CP-MD standard pump configuration
• Delivers up to 10 GPM maximum flow at 60 Hz
• Provides up to 20.5 ft maximum head
• Compact 1/15 HP air-cooled motor configuration
• Polypropylene wet-end construction with Buna-N and ceramic components
• 3/4-inch FPT inlet and 1/2-inch MPT outlet connections
• Designed for continuous-duty operation in compatible applications

Typical Applications

The March AC-3CP-MD is designed for applications such as chemical recirculation, chemical transfer and scrubber systems. This pump family is also used in compatible equipment and circulation systems where compact, sealless magnetic-drive operation is required.

Installation and Operating Notes

The Series 3 AC-3CP-MD is not self-priming and does not provide suction lift, so it requires a flooded suction installation. The pump should not be operated dry because the pumped liquid provides lubrication for the impeller system.

For replacement applications, verify the complete manufacturer part number before ordering. 0130-0018-0100 specifically identifies the AC-3CP-MD 115V complete standard pump. The 230V standard version uses a different March part number, 0130-0018-0200.

Always verify fluid compatibility, operating temperature, electrical requirements and system conditions before installation or operation.