March BC-2CP-MD 230 VAC Magnetic Drive Centrifugal Pump 0125-0088-0200

Series 2 Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors. BC-2CP-MD Mag Drive Pump March Pump's industrial BC-2CP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 5 gallons per minute at 2 feet, and its maximum head is 13 Feet (or around 5.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.375 female pipe thread and 0.75 male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.025 Horsepower blast cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March BC-2CP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March BC-2CP-MD is suitable for your application, please contact March Pump. Options Housings: Polypropylene or Delrin O-Ring: Buna N, Viton, or Ethylene Propylene Shaft: Ceramic or 316 Stainless Steel Impeller: Polypropylene or Delrin Perfect for Applications Including Applications for the BC-2CP-MD Mag Drive include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning. Great for Chemicals Including The BC-2CP-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The BC-2CP-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the BC-2CP-MD for any of the above listed chemicals.